There are many ways to create a temporary montage, but the result is always the same: the boundary of the montage isn't really a "boundary", but a series of open points that we can capture later.
Many of the shapes include a crochet hook, but not all knitters have one or like to use one. In this tutorial, I'll show you three ways to make a temporary pattern using only yarn and knitting needles.
To play points this way, we needa piece of scrapthis is slightly longer than the expected length of the edge projection.
If you want to use the open stitches right after assembly, use a piece of wire.a circular needleinstead of yarn scraps. That way you don't have to pick up stitches from the waste yarn as they are already on the circular needle. comfortable 🙂
I'm going to use scrap wire because it's more visible in the photos and also because I almost exclusively use scrap wire to make a temporary assembly.
Although we don't have to transfer stitches from the yarn when using a circular needle, I don't like having an extra circular needle hanging around the work when I have more than a dozen rows to do. In this case, I prefer to wrap my stitches around a piece of yarn.
This is my personal preference and doesn't mean you don't want to use a circular needle instead of thread when casting. Try it and decide for yourself.
About that,This is how this way of setting up points works:
1. At the end of the working row, make a slipknot and put the loop on a knitting needle. Grab the needle in your right hand.
2. Place the remaining thread under the needle and behind the working thread.
Hold the needle, the end of the thread and the excess thread in your right hand.
3. Take the working thread and bring it behind the excess thread and then in front of the needle.
4. Now place the working thread over the needle and in front of the excess thread.
We only made one point. Repeat steps 3 and 4 to assemble as many stitches as you need.
When finished assembling, make a loop at each end of the remaining yarn.Protect points from slippinga corda
If the stitches slip off the remaining yarn, they won't come undone, but it will be difficult to catch them again later when you need to use them in your project. Therefore, it is better to keep them on a piece of wire.
By the waycollect points, it's easy to create a temporary assembly this way. When it's time to use the hole stitches around the edges, undo the loop at one end of the excess yarn and slip the stitches off the yarn and onto the knitting needle, one at a time.See how it's done.
If you decided to use a circular knitting needle instead of scrap yarn, the task is even simpler: move the loops from the flexible part of the needle to one of the ends of the needle.
To play points this way, you canUse a piece of leftover yarn or the yarn part of a circular needle.Regardless of whether you choose one or the other, make sure it's a little longer than the width of the project.
1. Tie a slip knot and place it on a knitting needle. Hold the needle, the end of the thread and the excess thread in your right hand.
2. Slide your left index finger and thumb between the working thread and the residual thread so that the working thread is on your left index finger and the residual thread is on your left thumb. Hold the two wires with the rest of your left fingers like we do when using the long tail rig.
3. Move the needle under the excess thread and take the working thread from right to left. Then move the needle away from the residual thread to turn the loop of thread into a new stitch.
It's a simple movement that isn't so easy to describe in words or pictures. It will be clearer if youwatch in a video.
4. Now move the needle again to pick up the working thread from right to left. This round will be our next trick.
Repeat steps 3 and 4 to assemble more points.
Just like we did in path #1,tie a loop on each end of the remaining yarnto hold the stitches securely. When using these stitches, undo one of the loops andTransfer the stitches one by one to the knitting needle.
This form is slightly different from the previous two. means a„cauda longa provisorisches schwanzset“, and is very similar to the regular long-tail toss that many of us use so often.
To make this shape, we needa long piece of wire🇧🇷 It should be at least three times the length of the plaster edge. This piece replaces the line tail we normally have on a regular version of a long mounted tail.
1. Align the working thread, waste thread and needle and hold all three in your right hand.
2. Run your left index finger and thumb between the threads so that the working thread is on your left index finger and the excess thread is on your thumb. Hold the two strands with the rest of your left fingers.
3. Assemble the points with the long assembly.Click here to see how.
That is all. When you have reached the number of stitches needed, cut the excess thread, leaving small ends (approx. 10 cm / 4″ long) on each side of the assembled border. There isno need to tie tiesas we did when discussing paths #1 and #2. Residual yarn holds all stitches securely in place.
The biggest challenge on this path.After placing the temporary cast, it's time to remove the wires. It's not so easy to just transfer the stitches from the excess thread to the needle. no this time we have toLet go of excess thread and pick up stitches one at a time🇧🇷 If you are not comfortable fraying the thread with your fingers, use a thread needle.This is how.
It doesn't matter which way you put on a temporary cast. This patch is meant to be unraveled, so don't worry about how it looks. Once the design is complete and the open points created by this assembly into receiveintegrated into the work, the plaster itself will not harm the look of your project.
If you liked this tutorial,
here's something else you might find useful:
Book "Clean side edges"
Learntwelve waysto make the side edges of a woven designnice and neat🇧🇷 also forms offix side edges, and a way toimprove edgesof completed projects.
LOSE THE MIX
- All Club 2022 tutorials
- beret Brigitte
- Dealing with unfinished projects
- Dictionary of substance symbols and abbreviations
- Oriental (Russian) weaving simplified
- T-shirt for every day
- side pullover
- Simple socks of any size with any yarn
- the sports sock
- The sock is knitted
- Top to bottom hat any size with any yarn
Have fun knitting!
Chopsticks. Locate a clean or unused set of chopsticks from your last Chinese dinner to replace your usual crochet needles. Lightly bend to see how durable they will be as a crochet needle alternative. Cut off any tapered ends and proceed to size the entire down to a comfortable size or approximately 5 inches in length ...What is a temporary cast? ›
A splint is a typically temporary device that is used to treat an acute fracture. They can be preformed materials such as rigid plastic or metal that is covered in various cloth materials (removable velcro splints are a common example), or made out of fiberglass or plaster.How long can a temporary cast stay on? ›
They allow broken bones in the arm or leg to heal by holding them in place, and usually need to stay on for between 4 and 12 weeks. Taking good care of your cast will help ensure a better recovery.Can I crochet with my fingers? ›
Finger crochet is a terrific form of crochet that many people seem hesitant to try. Don't be afraid — it's exactly the same as your regular crochet work except that you replace your crochet hook with your finger.Can you crochet with chopsticks? ›
Always looking to learn, do more, do better and share my love of yarn, I created Knitting with Chopsticks to make knitting and crochet as simple as it gets so YOU can create what YOU want the way YOU want it.Can vegans crochet? ›
More and more of us are choosing to knit and crochet with plant-based yarn, so we've picked 6 of the best vegan yarns for knitters & crocheters. If you don't eat meat or use animal products, chances are you choose not to wear them either.What can I crochet quickly? ›
- Crochet Can Cozy. Popping open a cold can is great until your hand is freezing and wet from the condensation. ...
- Crochet Roses. Image: Skip to my Lou.
- Chunky Bobble Bows. ...
- Tutti Frutti Potholders. ...
- Crochet Headband. ...
- Deta's Bookmark. ...
- Circle Earrings. ...
- Zipper Pouch.
The Italian Cast On is a ribbing cast on. This means that it was specifically designed for use with a 1×1 ribbing stitch. This cast on has a distinctive, seamless look and an extremely stretchy edge. It works wonderfully on scarves and hats.What are the three forms of cast? ›
- Base Form/Infinitive without 'to': cast.
- Past Simple: cast.
- Past Partciple: cast.
- Present Partciple: casting.
- Third Person Singular: casts.
Discharge Instructions: Caring for Your Removable Cast (Splint) You will be going home with a removable cast. This is also called a splint. A cast helps your body heal by holding your injured bones or joints in place. A damaged cast can keep the injury from healing well.
Splints, also known as half-casts, provide less support than casts, but are faster and easier to use. They also can be tightened or loosened easily if the swelling in the arm or leg increases or decreases.Can a temporary cast get wet? ›
Keep your child's cast dry during baths or showers by covering it with two layers of plastic, sealed with a rubber band or duct tape. Avoid swimming while wearing a cast that isn't waterproof. A fiberglass cast that has a waterproof liner can get wet.What is the fastest bone to heal? ›
Healing can range from 6 weeks or even less for certain lower arm and wrist fractures to 6 months for more challenging leg breaks. Children's bones generally heal faster than adults' bones.How do you make a cast with flour? ›
- Boil 2.5 cups of water. ...
- Measure 4cups of flour into a large bowl while the water is boiling. ...
- Mix flour and water together to create your homemade plaster. ...
- Shape your plaster and imprint hand/foot.
- Bake plaster for approximately 3 hours at 225°F. ...
- Paint with acrylic paint.
- Separate your dreads at the roots. ...
- Clockwise rubbing For the loose hair at the roots, you can use the clockwise rubbing method to create new knots and keep loose hair down to a minimum. ...
- Palm rolling
It's a very useful technique when you're not sure what kind of edging you'll want or how long to make something. A Provisional Cast On allows you to make these decisions when you can to respond to the actual finished piece. Sometimes a Provisional Cast On is also used to create underarm stitches in top-down sweaters.How do you crochet without a needle or hook? ›
Single crochet is the easiest stitch to create. Simply insert both fingers through the loop, grab the yarn and pull through. Then with both loops resting on your index finger, insert your thumb through both loops and pull the working yarn through.What can I use for instant locs? ›
It's not a very long process, depending on the volume of your hair. You don't need to use any gels, wax or products when installing instant locs with your loctician, though some opt for Dr Locs Jinan Leave-In Conditioner and the Imani Locking Spray for a healthy and strong hold.How can I lock my hairstyle in place? ›
- Evenly coat the surface of your hair with a strong/freeze hold hairspray.
- Don't over-wet the hair. It should be a light mist.
- Don't touch your hair until the hairspray has dried.
This is a provisional cast-on, also known as invisible cast-on: one that can be easily undone to expose live stitches, and then knit from seamlessly. Usually done with a second piece of yarn that is ultimately removed.
Finger crochet is a terrific form of crochet that many people seem hesitant to try. Don't be afraid — it's exactly the same as your regular crochet work except that you replace your crochet hook with your finger.